VAUGHAN produces a focused range of professional hand tools — pry bars, framing hammers, and interchangeable saw blades — each built to perform under sustained job site conditions. The tools in this lineup are forged, tempered, or spring steel components, not cast assemblies, and the construction reflects the requirements of tradespeople who depend on consistent tool performance across full working days.

This page covers the complete current selection: the Superbar series in three configurations, the CF1 California framing hammer, and the Bear Saw blade system. Each tool is addressed by its specifications and practical application rather than general marketing claims.

The Superbar Series: Three Sizes, One Standard

The VAUGHAN superbar pry bar is the flagship product in this lineup, and it exists in three distinct size configurations to match different task requirements. All three versions share the same design logic — forged tempered steel, three beveled nail slots, and polished sharp blades for clean insertion — but differ in length and use context.

The core material across the series is forged, tempered steel rated for heavy duty use. The polished blade edges allow the bar to seat between surfaces without requiring excessive force on insertion, which reduces surface damage during finish work. Three beveled nail slots are positioned to accommodate different nail head sizes and angles, making each bar functional across rough framing and finish carpentry.

VAUGHAN Superbar 21 Inch — Full-Length Leverage

The VAUGHAN superbar 21 inch — model B215L, VN45201 — weighs 32 ounces and delivers maximum leverage within the Superbar range. At 21 inches, it provides the mechanical advantage needed for heavy prying tasks: pulling large framing nails, separating subfloor panels, or lifting structural components during demolition. The additional length converts to real force reduction at the handle, meaning less physical strain on extended pulls.

This is the right choice when working with embedded nails in dimensional lumber, or when prying apart assemblies where shorter bars lack the reach or leverage to apply consistent force without slipping.

VAUGHAN Stubby Superbar 305mm — Tight-Space Performance

The VAUGHAN stubby superbar 305mm — model B215S — measures 12 inches and is engineered for confined work areas where a full-length bar becomes impractical. Cabinet installation, baseboard removal, window trim work, and any application where swing radius is limited benefit from this format.

Despite its shorter profile, it retains the same forged steel construction and nail slot configuration as the larger models. The VAUGHAN heavy duty prybar designation applies here as well — the compact form doesn’t compromise on material grade. It functions equally well as a VAUGHAN molding scraping tool, where precision and control matter more than raw leverage.

VAUGHAN Superbar 380mm — Mid-Range Utility

The VAUGHAN superbar 380mm — model B215 — sits at 15 inches and covers the middle ground between reach and control. For general carpentry, renovation work, and tasks that alternate between light finish prying and moderate nail pulling, this length offers the most versatile balance in the series.

All three Superbar models are useful for prying, molding, scraping, and pulling nails — the functional overlap is intentional. The difference lies in the physical conditions of each job, not in capability.

CF1 California Framing Hammer: Construction-Grade Striking Tool

Specifications and Handle Construction

The VAUGHAN framing hammer cf1 — officially designated the CF1 California Framing Hammer — is a 650g (23 oz.) straight claw hammer built for framing applications. The handle is high-grade hickory, a material selected for its combination of shock absorption, tensile strength, and durability under repeated impact. Hickory handles outlast fiberglass in most field conditions when properly maintained, and they allow the user to feel the strike more directly, which helps experienced framers maintain consistent swing mechanics.

The straight claw configuration differs from the curved claw found on finish hammers — it is optimized for prying lumber apart and pulling framing nails embedded in dimensional stock, not for delicate nail removal in trim work. The VAUGHAN california framing hammer design reflects West Coast framing practices where speed and force take priority over finish sensitivity.

Milled Face Design

The VAUGHAN milled face hammer designation refers to the textured striking face on the CF1. A milled face — grid-pattern checkering cut into the face — increases friction between the hammer and nail head on contact, reducing glancing blows and improving nail set accuracy during rapid driving sequences. This matters in production framing where a single misset nail can split a stud or shift a layout mark.

The milled face does leave marks on exposed wood surfaces, which is appropriate for rough framing but should be considered before using the CF1 on finish or appearance-grade lumber. For framing applications — plates, studs, headers, joists — the face pattern is a performance feature, not a limitation.

Bear Saw Blade System: Precision Cutting with Replaceable Blades

Blade Construction and Tooth Geometry

The VAUGHAN bear saw blade is built on a spring steel substrate — the VAUGHAN spring steel blade designation reflects the material’s flexibility properties, which allow the blade to deflect slightly during flush-cutting operations without snapping. This is a critical characteristic when cutting protruding nails, fasteners, or other materials flush to a surface, where a rigid blade would bind or crack under lateral stress.

The VAUGHAN triple edged saw geometry refers to the specially ground, triple-edged teeth that are impulse hardened after grinding. Impulse hardening — a localized heat treatment applied to the tooth tips — increases edge retention significantly beyond standard blade hardening. The result is a VAUGHAN rust resistant blade with a corrosion-resistant plating over the spring steel base, combined with tooth hardness that maintains sharpness through extended cutting sessions.

Interchangeability and Blade Length

The VAUGHAN pull saw blade format means the blade cuts on the pull stroke, consistent with Japanese-style saw mechanics. Pull-stroke cutting allows thinner kerf widths and greater control on the cutting line, particularly when working in tight spaces or making precision crosscuts in trim and finish work.

At 250mm blade length, the Bear Saw blade covers a practical range of cut widths for both rough and finish applications. Critically, the blade is interchangeable with other Bear Saw blades and locks securely into the handle system — worn blades can be swapped without replacing the handle, which reduces long-term cost and material waste. When you’re ready to order a replacement blade, the lock mechanism ensures zero play once seated.

Selecting the Right VAUGHAN Tool for Your Application

Professional tradespeople often buy tools based on what the job demands in terms of leverage, material, and working space — and VAUGHAN’s current lineup is structured to answer those variables directly. Demolition and rough framing work points toward the 21-inch Superbar and the CF1. Finish carpentry and tight-space work points toward the Stubby Superbar. Flush-cutting operations and precision saw work point to the Bear Saw system.

There is no redundancy in this lineup — each tool covers a distinct functional range. The consistent material standard across forged steel pry bars, hickory-handled hammers, and spring steel saw blades reflects a coherent approach to tool quality rather than a mixed-grade catalog.